(855) 777-2040  •   Login  •

Adhesive Workholding Pallet System Designed for Complex Parts

April 22nd, 2022 by Blue Photon

Published | 1 MINUTE READ

Adhesive Workholding Pallet System Designed for Complex Parts

Blue Photon’s Grip Pallets are designed for quick change and adhesive workholding of complex and hard-to-hold parts for EDM, grinding, inspection, laser and milling operations

Photo of a Blue Photon grip pallet

Blue Photon has added five Grip Pallets and three new inserts for 52- and 96-mm quick-change receiver systems. The addition enables more applications using existing fixturing systems in machining centers. Blue Photon Grip Pallets are designed to simplify how parts are loaded, reduce scrap and increase spindle uptime.

Available in 150, 225 and 300 mm square pallets, the Grip Pallets are designed for quick change and adhesive workholding of complex and hard-to-hold parts for EDM, grinding, inspection, laser and milling operations. The pallets can hold parts securely, providing increased machining access on five to six surfaces while using standardized fixturing systems already in place.

Blue Photon’s grippers are inserted into new external inserts, designed specifically for the Grip Pallets. The external inserts are available for use with small, medium and large grippers. The new inserts allow for simple installation of the grippers at the required height for maximum holding power.

The 150-mm square pallet is available in aluminum and steel with a 52-mm pattern for a quick change receiver that will hold up to nine grippers. The 225-mm square pallet is available in aluminum and steel with a 96-mm pattern for a quick change receiver that will hold up to 21 grippers. The 300-mm square pallet is available in aluminum with a 96-mm pattern for a quick change receiver that will hold up to 33 grippers.

Each Grip Pallet includes two handles with multiple color choices and four spacers, with a 25.4-mm standoff that allows for the recommended nominal of 1-mm joint thickness between gripper and part. Optional clamp studs are available for both 52 mm and 96 mm patterns for 5th axis, Jergens, Lang and Mate systems. Part can be removed with a ¼ turn twist of the gripper or hot-water soak. Residual adhesive is removed by using a handheld steamer or a hot-water soak and a light peeling action.

EDITED BY JENNY RUSH | Senior Managing Editor, Modern Machine Shop

www.mmsonline.com