February 22nd, 2023 by Blue Photon
Part #: 14230 – Standard
Part #: 14231 – Corrosion Resistant
Features
- To hold small size workpieces.
- Use in applications for simplified fixture design.
- Insert into fixture from the topside.
- Cannot be retracted during workplace loading.
- Workpiece separates from gripper with hot water soak, twisting, or dry ice blasting.
- Average tensile holding power with BlueGrip S2 workholding adhesive is 150 lbs.*
- Use P/N 14231** where deionized water or acid is used.
*Testing done under controlled conditions. **CNC spindle mounted cleaning tool cannot be used with corrosion resistant grippers.
February 22nd, 2023 by Blue Photon
Part #: 24100 – Small internal insert to use with small head-in gripper P/N 14130/14131.
Part #: 25100 – Medium internal insert to use with medium head-in gripper P/N 15130/15131.
Part #: 26100 – Large internal insert to use with large head-in gripper P/N 16160/16161.
Features
- Use gripper inserts to protect aluminum fixtures from thread galling.
- Made from hardened steel with a black oxide finish.
- Install with thread locker.
- Screws in from the bottom.
- Thread locked into the fixture.
- Workpiece separates from gripper with 1/4 turn of gripper or hot water soak.
February 21st, 2023 by Blue Photon
Dark green applicator for 30 cc amber syringe barrel.
Part # 75112 – 18 gauge fine point applicator, 50 per box.
February 21st, 2023 by Blue Photon
End caps fit securely over syringe and cartridge tabs, and feature a center push button that makes it easy to create a snug, airtight seal.
Part #: 43800 – 30 cc amber syringe barrel end cap, 20 per box.
Part #: 46802 – 1 liter amber cartridge barrel end cap, 10 per box.
February 21st, 2023 by Blue Photon
Tip caps protect BlueGrip workholding adhesive from light exposure.
Part #: 43700 – 30 cc amber syringe barrel tip cap, 20 per box.
Part #: 46700 – 1 liter amber cartridge barrel tip cap, 10 per box.
February 21st, 2023 by Blue Photon
UV blocking barrels block UV light, while allowing fluid levels to be monitored.
Part #: 43402 – 30 cc amber syringe barrel with piston and label, 20 per box.
Part #: 46402 – 1 liter amber cartridge barrel with piston and label, 10 per box.
February 21st, 2023 by Blue Photon
Barrel-filling system for BlueGrip workholding adhesive.
Features
- Includes stand with retainer block.
- Use to fill 30 cc syringes from a 1 liter cartridge.
February 21st, 2023 by Blue Photon
Optional pail protectors to extend seal life and reduce clean-up of BlueGrip workholding adhesive. To be inserted between the dispenser follower plate and the adhesive in the pail.
Part # 48006 – 10 per box
February 21st, 2023 by Blue Photon
For efficient unloading of BlueGrip workholding adhesive into smaller one liter cartridges. Highly efficient unloading for one component material, using durable components, and wear resistant coatings.
- Single-post unloader
- Manual bulk filling station
- Use to fill 1 liter cartridges
Features
- Dispensing Consistency – Fast air motor changeover with rapid-cycling, dual air-piloted cylinder provides uniform material output and consistent material pressure.
- Ease of Operation – Simple and intuitive front facing pneumatic controls that feature auto shutdown to prevent damage to the unit when the pump reaches the bottom of the container.
- Speed of Maintenance – Removable packing gland provides fastest repair in industry, without having to remove the pump from the line.
- Production Efficiencies – Interchangeable follower plate and seal design reduce wasted material and lengthy changeover procedures.
- Safety Compliance – Tapered solvent cup and finger safe design for CE compliance.
- Easy Pail Changeover – Pail hold down feature facilitates ease of container changeover procedure, preventing movement when the follower is withdrawn.
- Pail Protectors (P/N 48006) – Optional pail protectors to extend seal life and reduce clean-up of BlueGrip workholding adhesive. To be inserted between the dispenser follower plate and the adhesive in the pail.
Product Specifications
- Height 54.5″
- Depth 19″
- Width 25″
- Dry Weight 230-260 lb.
- Air inlet connection 1/2″ NPT
- Material outlet size connection -12 SAE
Automated recommendations available upon request.
Contact us for help selecting the best adhesive dispensing equipment for your application.
February 21st, 2023 by Blue Photon
Adapter fits onto 30 cc adhesive tubes for dispensing with pneumatic dispensers.
Features
- 6′ (1.8 m) hose.
- Required in order to operate all automated dispensers using 30 cc adhesive tubes.
- Designed with a positive safety locking action to prevent accidental disengagement. Adapters are easy to install and remove.
- Each adapter assembly is precision molded for secure attachment to the adhesive tube with minimal effort, making its connection to the air output port of the fluid dispensing unit fast and seamless.
