News

Optional hard case with foam insert and custom made slots to hold workholding kit components.

To adjust a gripper height while using the head-in grippers.

Part #: 51330 – Small shim, stainless steel .005″ thickness.

Part #: 51430 – Small shim, stainless steel .010″ thickness.

Part #: 55330 – Medium shim, stainless steel .005″ thickness.

Part #: 55430 – Medium shim, stainless steel .010″ thickness.

Part #: 58330 – Large shim, stainless steel .005″ thickness.

Part #: 58430 – Large shim, stainless steel .010″ thickness.

Used to install or remove head-out grippers within a fixturing system. 

Part # 52525 – 1/4 drive 10 mm deep well socket. Use with small grippers. 

Part # 55595 – 3/8 drive 13 mm deep well socket. Use with medium grippers. 

Part # 56595 – 3/8 drive 16 mm deep well socket. Use with large grippers. 

Head-in grippers separate with 1/4 turn twist of ratchet. 

Part # 51525 – 1/4 drive 8 mm thin wall socket. Use with small grippers. 

Part # 54595 – 3/8 drive 12 mm thin wall socket. Use with medium grippers. 

Part # 58595 – 3/8 drive 14 mm thin wall socket. Use with large grippers. 

Head-in grippers separate with 1/4 turn twist of ratchet.

Part #: 50200 – 3/8 drive ratchet use with sockets P/N 54595 and 58595.

Part #: 52200 – 1/4 drive ratchet use with socket P/N 51525.