Adhesive Dispensers

Pneumatic Dispenser

Part#: 71906

Pneumatic adhesive dispensing unit with digital time/pressure display.

Features

• Digital time/pressure display.
• Foot-operated adhesive dispenser.
• Timed or steady modes of operation.
• Vacuum control keeps thin fluids from dripping between cycles.
• Optional electric finger switch (P/N 75490) available to order with pneumatic dispenser.

High Precision Dispenser with Optimeter

Part#: 73006

Includes controls and settings to electronically change/adjust dispensing time, pressure and vacuum. Consists of an auto-increment feature to adjust dispensing parameters after a certain number of shots or a specific lapsed time and auto-sequence mode that allows deposit patterns to be repeated automatically.

Features

• 400 individual memory storage cells.
• Scroll or select cells via front panel keypad or external PC/PLC control.
• Switch between steady, timed and teach modes.
• Front panel manual cycle key.
• Teach function.
• Multi-level operator lockout.
• Alarm indicators.
• End of cycle feedback loop.
• Soft button data input 0-9 keypad.
• Operator control of LCD display brightness.
• Easy up/down arrow key navigation.
• External PC interface for data input.
• Display cycle counter.
• RS-232 communication capability.
• ESD safe via connection with external ESD.
• 0-100 psi (0-6.9) bar air regulation range.
• D-sub I/0 (15-pin) and communication (9-pin) connections.
• Alarm I/0 signals.

Manual Plunger

Part#: 74000

Plunger fits into 30 cc adhesive tubes for dispensing by hand.

Dispenser Adapter Assembly

Part#: 75880

Adapter fits onto 30 cc adhesive tubes for dispensing with pneumatic dispensers.

Features

• 6′ (1.8 m) hose.
• Required in order to operate all automated dispensers using 30 cc adhesive tubes.
• Designed with a positive safety locking action to prevent accidental disengagement. Adapters are easy to install and remove.
• Each adapter assembly is precision molded for secure attachment to the adhesive tube with minimal effort, making its connection to the air output port of the fluid dispensing unit fast and seamless.

5 Gallon Pail Dispenser

Part#: 77707

For efficient unloading of BlueGrip workholding adhesive into smaller one liter cartridges. Highly efficient unloading for one component material, using durable components, and wear resistant coatings.

• Single-post unloader
• Manual bulk filling station
• Use to fill 1 liter cartridges

Features

• Dispensing Consistency – Fast air motor changeover with rapid-cycling, dual air-piloted cylinder provides uniform material output and consistent material pressure.
• Ease of Operation – Simple and intuitive front facing pneumatic controls that feature auto shutdown to prevent damage to the unit when the pump reaches the bottom of the container.
• Speed of Maintenance – Removable packing gland provides fastest repair in industry, without having to remove the pump from the line.
• Production Efficiencies – Interchangeable follower plate and seal design reduce wasted material and lengthy changeover procedures.
• Safety Compliance – Tapered solvent cup and finger safe design for CE compliance.
• Easy Pail Changeover – Pail hold down feature facilitates ease of container changeover procedure, preventing movement when the follower is withdrawn.
• Pail Protectors (P/N 48006) – Optional pail protectors to extend seal life and reduce clean-up of BlueGrip workholding adhesive. To be inserted between the dispenser follower plate and the adhesive in the pail.

Product Specifications

• Height 54.5″
• Depth 19″
• Width 25″
• Dry Weight 230-260 lb.
• Air inlet connection 1/2″ NPT
• Material outlet size connection -12 SAE

Automated recommendations available upon request.

Contact us for help selecting the best adhesive dispensing equipment for your application.

Barrel Loader

Part#: 46600, 75849

Barrel-filling system for BlueGrip workholding adhesive.

Features

• Includes stand with retainer block.
• Use to fill 30 cc syringes from a 1 liter cartridge.

Syringe and Cartridge Barrels

Part#: 43402, 46402

UV blocking barrels block UV light, while allowing fluid levels to be monitored.

Part #: 43402 – 30 cc amber syringe barrel with piston and label, 20 per box.

Part #: 46402 – 1 liter amber cartridge barrel with piston and label, 10 per box.

Tip Caps

Part#: 43700, 46700

Tip caps protect BlueGrip workholding adhesive from light exposure.

Part #: 43700 – 30 cc amber syringe barrel tip cap, 20 per box.

Part #: 46700 – 1 liter amber cartridge barrel tip cap, 10 per box.

End Caps

Part#: 43800, 46802

End caps fit securely over syringe and cartridge tabs, and feature a center push button that makes it easy to create a snug, airtight seal.

Part #: 43800 – 30 cc amber syringe barrel end cap, 20 per box.

Part #: 46802 – 1 liter amber cartridge barrel end cap, 10 per box.

Fine Point Applicator

Part#: 75112

Dark green applicator for 30 cc amber syringe barrel.

Part # 75112 – 18 gauge fine point applicator, 50 per box.